1. Single-port PoE Injector
PT-PSE106GW-AR is a gigabit single port ac input PoE solution for remote powering of current as well as emerging high power applications.
2. Lightning & Surge protection 6KV(10/700us)
PT-PSE106GW-AR PoE Injector provides 8 lines power& signal 6KV(10/700us) lightning-protection to upgrade IP surveillance devices, WLAN APs and other Ethernet devices escape from lightning strikes.
3. High power PoE Injector
PT-PSE106GW-AR, 60W PoE injector, output 55V, 1.1A, with detection chip inside, it is an active PoE Injector.
PT-PSE106GW-AR, it is a single port PoE Injector. It provides 55Vdc, 1.1A power for remote PDs over full 4-pairs output with 6KV (10/700us) surge protection. It supports both 10/100Base-T and Gigabit device. It works for 60W PoE PDs, such as wireless APs, base stations, high power cameras, door locks, displays, POS, information kiosks and other high power Ethernet
It is also compatible and safe to use with any IEEE802.3af/at compliant terminals PT-PSE106GW-AR is designed for indoor use. It works with input voltage of 100-240Vac and operates under 0℃~40℃ It has detection chip inside, which will detect and classify PD before powering it. It will not apply power until a standardcompliant PD is detected. The effective distance is 100 meters over Cat5e/Cat6 cables.
- IEEE802.3 10Base-T Ethernet
- IEEE802.3u 100Base-Tx Fast Ethernet
- IEEE802.3ab 1000Base-T Gigabit Ethernet
- Full compliant with IEEE802.3af/at, PoE++
- RoHS Compliance
- WEEE Compliance
Input & Output
- Input :100-240Vac 1.5A 50/60Hz
- Output: 55Vdc 1100mA
- Power Pins: 4/5(+), 7/8(-) and 3/6(+),1/2(-)
- Data Speed: 10/100/1000Mbps
- Operating Temperature: 0℃ to 40℃
- Operating Humidity: 20% to 80%, non-condensation
- Storage Temperature: -20℃ to 70℃
- Storage Humidity: 10% to 90%, non-condensation
- Operating Altitude: up to 5000meters
AC Surge Protection
- 1.0KV (5P/5N)
- L-N 1.2/50 (8/20) Tr/Th us
- 2.0KV (5P/5N)
- L-PE 1.2/50 (8/20) Tr/Th us
- N -PE
PoE Surge Protection
- Protected line: 1,2,3,4,5,6,7,8
- Common mode surge protection(10/700us): 6KV
- Differential mode surge protection (10/700us): 1.5KV
- Case: Plastic
- Color: Black
- Mounting: Wall-mounted
- IP Rated: IP40
- Size: 193mm X 85mm X 41mm
- Weight: 425g
- cUL/UL, FCC, CE, PSE, SAA, BIS
- FCC CFR47 Part 15, EN55024, EN55032
- IEC61000-4-2(ESD) ± 6kV(contact), ±8kV(air)
- IEC61000-4-3(RS) 10V/m(80MHz~2GHz)
- IEC61000-4-4(EFT) Power Port: ±2kV; Data Port:±1kV
- IEC61000-4-5(Surge) Power Port:±1kV/DM, ±2kV/CM
- IEC61000-4-6(CS) 10V(150kHz~80MHz)
- IEC60068-2-32(Free Fall)
- Power Indicator: Green
- PoE Load Indicator:
Order Info. PT-PSE106GW-AR 55Vdc/1.1A/1000M/4,5(+), 7,8(-) & 3,6(+), 1,2(-)/Surge Protection/Active
Packing PT-PSE106GW-AR x1
Power Cord x1 (Optional)
Order samples, we have in stock.
Bigger orders, 2-4 weeks after payment.
How to buy?
Click the BLUE BUTTON "Inquire now" (in the middle of page), input your order info and send to us.
Your sales consultant will contact you with 24 hr.
YES. Tell us your demand, get the products you want.
For distributors, we can put your labels on it too.