1. Single-port PoE Injector
PT-PSE106GW is a single port solution for remote powering of current as well as emerging high power applications.
2. Output high power with detection
PT-PSE106GW will detect PD device legal or not, before output 55Vdc/1.1A. when the PD is leagl,the PT-PSE106GW would output power.
3. Industrial Leading PoE Technology
It was recently upgraded to a smaller form factor but still comes with the industry leading PoE technology that enables 60W of PoE over standard Cat5e or better cables to easily upgrade IP surveillance devices, WLAN APs and other Ethernet devices.
4. Easy to install
PT-PSE106GW PoE module has two mounting holes for fixed to the wall by self-tapping screw or tied to shelf.
PT-PSE106GW, it is a single port PoE Injector. It provides 55Vdc, 1.1A power for remote PDs over full 4-pairs output. It supports both 10/100Base-T and Gigabit device. It works for 60W PoE PDs, such as wireless APs, base stations, high power cameras, door locks, displays, POS, information kiosks and other high power Ethernet terminals. It is also compatible and safe to use with any IEEE802.3af/at compliant terminals.
PT-PSE106GW is designed for indoor use. It works with input voltage of 100-240Vac. It has detection chip inside, which will detect and classify PD before powering it. It will not apply power until a standard-compliant PD is detected. The effective distance is 100 meters over Cat5e/Cat6 cables.
- IEEE802.3 10Base-T Ethernet
- IEEE802.3u 100Base-Tx Fast Ethernet
- IEEE802.3ab 1000Base-T Gigabit Ethernet
- Full compliant with IEEE802.3af/at, PoE++
- RoHS Compliance
- WEEE Compliance
Input & Output
- Input :100-240Vac 1.5A 50/60Hz
- Output: 55Vdc 1100mA
- Power Pins: 4/5(+), 7/8(-) and 3/6(+),1/2(-)
- Data Speed: 10/100/1000Mbps
-Operating Temperature: 0℃ to 40℃
- Operating Humidity: 20% to 80%, non-condensation
- Storage Temperature: -20℃ to 70℃
- Storage Humidity: 10% to 90%, non-condensation
- Operating Altitude: up to 2000meters
AC Surge Protection
- 1.0KV (5P/5N)
- L-N 1.2/50 (8/20) Tr/Th us
- 2.0KV (5P/5N)
- L-PE 1.2/50 (8/20) Tr/Th us
- N -PE
- Case: Plastic
- Color: Black
- Mounting: Wall-mounted
- IP Rated: IP40
- Size: 193mm X 85mm X 41mm
- Weight: 380g
- cUL/UL, FCC, CE, PSE, SAA, BIS
- FCC CFR47 Part 15, EN55024, EN55032
- IEC61000-4-2(ESD) ± 6kV(contact), ±8kV(air)
- IEC61000-4-3(RS) 10V/m(80MHz~2GHz)
- IEC61000-4-4(EFT) Power Port: ±2kV; Data Port:±1kV
- IEC61000-4-5(Surge) Power Port:±1kV/DM, ±2kV/CM
- IEC61000-4-6(CS) 10V(150kHz~80MHz)
- IEC60068-2-32(Free Fall)
- Power Indicator : Green
- PoE Load Indicator :
Order Info. PT-PSE106GW 55Vdc/1.1A/1000Mbps/4,5(+), 7,8(-) & 3,6(+), 1,2(-)/Active
Package Info. PT-PSE106GW x1
Power Cord x1 (Optional)
Order samples, we have in stock.
Bigger orders, 2-4 weeks after payment.
How to buy?
Click the BLUE BUTTON "Inquire now" (in the middle of page), input your order info and send to us.
Your sales consultant will contact you with 24 hr.
YES. Tell us your demand, get the products you want.
For distributors, we can put your labels on it too.