1. Single-port PoE Midspan
PT-PSE106SAR48-24 LAN port connected to normal switch for data exchange, and PoE port output power and data for remoted PD over Cat5 or Cat5e cables.
2. Output power directly
PT-PSE106SAR48-24, output 24Vdc non-standard voltage, it output power directly without detection chip inside.
3. Output power 30W
PT-PSE106SAR48-24 output current 1.25A, 24 watts, can cooperate with the most PDs in the market.
4. Strong lightning function
PT-PSE106SAR48-24 provide network signal and PoE power 6KV(10/700us) lightning protection.
5. Easy to install
PT-PSE106SAR48-24 with small size, easy to install with two holes. It can fixed to wall with self-tapping screw.
PT-PSE106SAR48-24 is a single port PoE Injector. It provides 24Vdc, 1.25A power for remote PDs over 2-pairs output with 6KV (10/700us) surge protection. It supports both 10/100Base-T and Gigabit device. It works for 30W PoE PDs, such as wireless APs, ONU IP phone and other power Ethernet terminals.
PT-PSE106SAR48-24 is designed for indoor use. It works with input voltage of 44-72Vdc. It will directly power PDs without detection. The effective distance is 100 meters over Cat5e/Cat6 cables.
- IEEE802.3 10Base-T Ethernet
- IEEE802.3u 100Base-Tx Fast Ethernet
- IEEE802.3ab 1000Base-T Gigabit Ethernet
- RoHS Compliance
- WEEE Compliance
Input & Output
- Input : 44-72Vdc 2.5A
- Output: 24Vdc 1250mA
- Power Pins: 4/5(+), 7/8(-)
- Data Speed: 10/100/1000Mbps
- Operating Temperature: 0℃ to 40℃
- Operating Humidity: 20% to 80%, non-condensation
- Storage Temperature: -20℃ to 70℃
- Storage Humidity: 10% to 90%, non-condensation
- Operating Altitude: up to 2000 meters
PoE Surge Protection
- Protected line: 4,5,7,8
- Common mode surge protection(10/700us): 6KV
- Differential mode surge protection (10/700us): 1.5KV
- Case: Plastic
- Color: Black
- Mounting: Wall-mounted
- IP Rated: IP40
- Size: 120mm X 125mm X 44mm
- Weight: 350g
- FCC CFR47 Part 15, EN55024, EN55032
- IEC61000-4-2(ESD) ± 6kV(contact), ±8kV(air)
- IEC61000-4-3(RS) 10V/m(80MHz~2GHz)
- IEC61000-4-4(EFT) Power Port: ±2kV; Data Port:±1kV
- IEC61000-4-5(Surge) Power Port:±1kV/DM, ±2kV/CM
- IEC61000-4-6(CS) 10V(150kHz~80MHz)
- IEC60068-2-32(Free Fall)
- Power Indicator: Green
- PoE Load Indicator: Green
PT-PSE106SAR48-24 24Vdc/1.25A/1000M/(4,5+,7,8-) /Surge Protection/Passive
Power Cord x 1 (Optional)
Manual x 1
Order samples, we have in stock.
Bigger orders, 2-4 weeks after payment.
How to buy?
Click the BLUE BUTTON "Inquire now" (in the middle of page), input your order info and send to us.
Your sales consultant will contact you with 24 hr.