1. Fiber convert
PT-PSE105GS-E is an Industrial Fiber PoE injector with input voltage 12-24Vdc, accepts fiber signals. It is designed for special scenarios, like highway side, exurb, etc.
2. 6KV surge protection on PoE port
PT-PSE105GS-E has a 6KV surge protection on PoE port to protect inner components and switch from surge damages.
3. Wide working temperature
PT-PSE105GS-E work temperaure is -40℃~65℃, it even meets requests of plateau projects and chilly condition projects.
PT-PSE105GS-E is a single-port, industrial-scale PoE injector. It provides 55Vdc, 0.55A power for remote PDs over 2-pairs output with 6KV (10/700us) surge protection. It supports both 10/100Base-T and Gigabit device. It works for 30W PoE PDs, such as wireless access points, network cameras, VoIP phones and other high power Ethernet terminals. It is also compatible and safe to use with any IEEE802.3at/af compliant terminals.
PT-PSE105G-E is designed for indoor use. It works with input voltage of 12-24Vdc and operates under -40℃ to 65℃. It has detection chip inside,which will detect and classify PD before powering it. It will not apply power until a standardcompliant
PD is detected. The effective distance is 100m over Cat5e/Cat6 cables. It has grooves, can easily jam into the guide rail.
- IEEE802.3 10Base-T Ethernet
- IEEE802.3u 100Base-Tx Fast Ethernet
- IEEE802.3ab 1000Base-T Gigabit Ethernet
- Full compliant with IEEE802.3af/at
- RoHS Compliance
- WEEE Compliance
Input & Output
- Input :12-24Vdc 4A
- Output: 55Vdc 550mA
- Power Pins: 4,5(+), 7,8(-) or 3,6(+),1,2(-)
- Data Speed: 10/100/1000Mbps
- Operating Temperature: -40℃ to 65℃
- Operating Humidity: 20% to 80%, non-condensation
- Storage Temperature: -40℃ to 85℃
- Storage Humidity: 10% to 90%, non-condensation
- Operating Altitude: up to 5000meters
PoE Surge Protection
- Protected line: 1,2,3,4,5,6,7,8
- Common mode surge protection(10/700us): 6KV
- Differential mode surge protection (10/700us): 1.5KV
- Case: Metal
- Color: Black
- Mounting: DIN-rail
- IP Rated: IP40
- Size: 135mm X 96mm X 35.4mm
- Weight: 650g
- FCC CFR47 Part 15, EN55024, EN55032
- IEC61000-4-2(ESD) ± 6kV(contact), ±8kV(air)
- IEC61000-4-3(RS) 10V/m(80MHz~2GHz)
- IEC61000-4-4(EFT) Power Port: ±2kV; Data Port:±1kV
- IEC61000-4-5(Surge) Power Port:±1kV/DM, ±2kV/CM
- IEC61000-4-6(CS) 10V(150kHz~80MHz)
- IEC60068-2-32(Free Fall)
- Power Indicator: Green
- PoE Load Indicator: Yellow
PT-PSE105GS-E 55Vdc/0.55A/1000Mbps/4,5(+), 7,8(-) or 3,6(+),1,2(-)/Surge Protection/Active
Order samples, we have in stock.
Bigger orders, 2-4 weeks after payment.
How to buy?
Click the BLUE BUTTON "Inquire now" (in the middle of page), input your order info and send to us.
Your sales consultant will contact you with 24 hr.
YES. Tell us your demand, get the products you want.
For distributors, we can put your labels on it too.