1. SFP port
PT-PSE107GRO-S is a single port PoE Injector with SFP fiber connection port.
2. Active PoE Injector
It has detection chip inside, which will detect and classify PD before powering it. It will not provide power until a standardcompliant PD is detected.
3. Exellent surge protection
To protect indoor devices and inner components from surge damage, PT-PSE107GRO-S PoE injector has 4KV(10/700μs) surge protection on PoE port.
4. Wide working temperature
It can work full loading in temperature -40℃ to 65℃. The wide working temperature design made it meets much harsh conditions requiremetns of work environments.
PT-PSE107GRO-S is a single port PoE Injector with SFP fiber connection port. It provides 55Vdc, 1.1A power for remote PDs over full-4pairs output with 4KV (10/700us) surge protection. It supports both 10/100Base-T and Gigabit device. It works for 60W PoE PDs, such as wireless APs, base stations, high power cameras, door locks, displays, POS, information kiosks and other high power Ethernet terminals. It is also compatible and safe to use with any IEEE802.3af/at, PoE++ compliant terminals. It works like a switch, data is interoperable among LAN port, PoE port and SFP port.
PT-PSE107GRO-S is designed for indoor use but can work outdoor by covered with waterproof case. It works with 100-240Vac input and operates under -40℃ to 65℃ full loading. It has detection chip inside, which will detect and classify PD before powering it. It will not provide power until a standardcompliant PD is detected.The effective distance is 100 meters over Cat5e/Cat6 cables. It is specially suitable for working in complex power situations.
- IEEE802.3 10Base-T Ethernet
- IEEE802.3u 100Base-Tx Fast Ethernet
- IEEE802.3ab 1000Base-T Gigabit Ethernet
- Full compliant with IEEE802.3af/at, PoE++
- RoHS Compliance
- WEEE Compliance
Input & Output
- Input :100-240Vac 1.5A 50/60Hz
- Output: 55Vdc 1100mA
- Power Pins: 4,5(+), 7,8(-) & 3,6(+), 1,2(-)
- Data Speed: 10/100/1000Mbps
- Operating Temperature: -40℃ to 65℃
- Operating Humidity: 20% to 80%, non-condensation
- Storage Temperature: -40℃ to 85℃
- Storage Humidity: 10% to 90%, non-condensation
- Operating Altitude: up to 5000 meters
AC Surge Protection
- 1.0KV (5P/5N)
- L-N 1.2/50 (8/20) Tr/Th us
- 2.0KV (5P/5N)
- L-PE 1.2/50 (8/20) Tr/Th us
- N -PE
PoE Surge Protection
- Protected line: 1,2,3,4,5,6,7,8
- Common mode surge protection(10/700us): 4KV
- Differential mode surge protection (10/700us): 1.5KV
- Case: Metal
- Color: Black
- Mounting: Wall-mounted
- IP Rated: IP20
- Size: 203mm X 130mm X 41mm
- Weight: 910g
- CE, FCC
- FCC CFR47 Part 15, EN55024, EN55032
- IEC61000-4-2 (ESD) ± 6kV(contact), ±8kV(air)
- IEC61000-4-3 (RS) 10V/m(80MHz~2GHz)
- IEC61000-4-4 (EFT) Power Port: ±2kV; Data Port:±1kV
- IEC61000-4-5 (Surge) Power Port:±1kV/DM, ±2kV/CM
- IEC61000-4-6 (CS) 10V(150kHz~80MHz)
- IEC60068-2-6 (Vibration)
- IEC60068-2-27 (Impact)
- IEC60068-2-32 (Free Fall)
- Power indicator: Green
- Load active Indicator: Green
- SFP fiber indicator: Green
- LAN data indicator: Yellow
PT-PSE107GRO-S 55Vdc/1.1A/1000Mbps/4,5(+), 7,8(-) & 3,6(+), 1,2(-)/Surge Protection/Active
Power Cord x1 (Optional)
Order samples, we have in stock.
Bigger orders, 2-4 weeks after payment.
How to buy?
Click the BLUE BUTTON "Inquire now" (in the middle of page), input your order info and send to us.
Your sales consultant will contact you with 24 hr.
YES. Tell us your demand, get the products you want.
For distributors, we can put your labels on it too.