1. SFP port
PT-PSE110G-S accepts fiber signals and convert them to LAN signals, then transmits these signals and power to terminal device.
2. Built-in detection chip
PT-PSE110G-S is an active PoE injector, it will detect if terminal device is IEEE802.3af/at standard product before power supply.
3. AC Surge Protection
Excellent AC surge protection.
4. Easy installation
It has two mounting hole on the back, easy to install and operate on walls or on the desktops.
PT-PSE110G-S is a single-port PoE injector, which has a flexible SFP transceiver ports for uplink. It provides 55Vdc, 0.55A power for remote PDs over 2-pairs output. It supports both 10/100Base-T and Gigabit device. It works for 30W PoE PDs, such as wireless access points, network cameras, VoIp phones and other high power Ethernet terminals. It is also compatible and safe to use with any IEEE802.3at/af compliant terminals.
PT-PSE110G-S is designed for indoor use. It works with input voltage of 100-240Vac It has detection chip inside, which will detect and classify PD before powering it. It will not apply power until a standard-compliant PD is detected. The effective distance is 100 meters over Cat5e/Cat6 cables. It has two mounting hole on the back, can be easily hung on the wall.
- IEEE802.3 10Base-T Ethernet
- IEEE802.3u 100Base-Tx Fast Ethernet
- IEEE802.3ab 1000Base-T Gigabit Ethernet
- Full compliant with IEEE802.3af/at
- RoHS Compliance
- WEEE Compliance
Input & Output
- Input :100-240Vac 1.0A 50/60Hz
- Output: 55Vdc 550mA
- Power Pins: 4,5(+), 7,8(-) or 3,6(+),1,2(-)
- Data Speed: 10/100/1000Mbps
- Operating Temperature: 0℃ to 40℃
- Operating Humidity: 20% to 80%, non-condensation
- Storage Temperature: -20℃ to 70℃
- Storage Humidity: 10% to 90%, non-condensation
- Operating Altitude: up to 5000 meters
PoE Surge Protection
- 1.0KV (5P/5N)
- L-N 1.2/50 (8/20) Tr/Th us
- 2.0KV (5P/5N)
- L-PE 1.2/50 (8/20) Tr/Th us
- N -PE
- Case: Plastic
- Color: Black
- Mounting: Wall-mounted
- IP Rated: IP40
- Size: 146mm X 67mm X 36.5mm
- Weight: 245g
- FCC CFR47 Part 15, EN55024, EN55032
- IEC61000-4-2(ESD) ± 6kV(contact), ±8kV(air)
- IEC61000-4-3(RS) 10V/m(80MHz~2GHz)
- IEC61000-4-4(EFT) Power Port: ±2kV; Data Port:±1kV
- IEC61000-4-5(Surge) Power Port:±1kV/DM, ±2kV/CM
- IEC61000-4-6(CS) 10V(150kHz~80MHz)
- IEC60068-2-32(Free Fall)
- Power Indicator: Green
- PoE Load Indicator: Green
PT-PSE110G-S 55Vdc/0.55A/1000Mbps/4,5(+),7,8(-) or 3,6(+),1,2(-) /SFP/Active
Power Cord x1 (Optional)
Order samples, we have in stock.
Bigger orders, 2-4 weeks after payment.
How to buy?
Click the BLUE BUTTON "Inquire now" (in the middle of page), input your order info and send to us.
Your sales consultant will contact you with 24 hr.
YES. Tell us your demand, get the products you want.
For distributors, we can put your labels on it too.