1. Design for Industrial use
PROCET PT-PSE105G-D Industrial PoE injector equipped with industrial electronic components, with input voltage 44-57Vdc, output 30W guarantee, suitable for complex situation.
2. Active PoE Injector
PT-PSE105G-D has detection protection chip inside, automatic detecting before power up the PD and protection of non-standard devices.
3. 6KV surge protection on PoE port
PT-PSE105G-D has a 6KV surge protection on PoE port to protect inner components and switch from surge damages.
4. Working temperature -40℃ to 65℃
PT-PSE105G-D operating temperature is -40℃ to 65℃, it even meets requests of plateau projects and chilly condition projects.
PT-PSE105G-D is a single-port, industrial-scale PoE injector. It provides 30W power for remote PDs over 2 pairs output with 6KV (10/700us) surge protection. It supports 10/100/1000Mbps of data speed. It works for 30W PoE PDs, such as wireless access points, network cameras, VoIp phones and other high power Ethernet terminals.
It is also compatible and safe to use with any IEEE802.3 af/at compliant terminals.
PT-PSE105G-D is designed for indoor use but can work outdoor by covered with waterproof case. It works with input voltage of 44-57Vdc and operates under -40℃to 65℃. It has detection chip inside,which will detect and classify PD before powering it. It will not apply power until a standardcompliant PD is detected. The effective distance is 100 meters over Cat5e/Cat6 cables.
This model equipped standard DIN rail mounting bracket, which can easily jam into the guide rail.
- IEEE802.3 10Base-T Ethernet
- IEEE802.3u 100Base-Tx Fast Ethernet
- IEEE802.3ab 1000Base-T Gigabit Ethernet
- Full compliant with IEEE802.3af/at
- RoHS Compliance
- WEEE Compliance
Input & Output
- Input :44-57Vdc
- Output: 30W
- Power Pins: 4/5(+), 7/8(-)
- Data Speed: 10/100/1000Mbps
- Operating Temperature: -40℃ to 65℃
- Operating Humidity: 20% to 80%, non-condensation
- Storage Temperature: -40℃ to 85℃
- Storage Humidity: 10% to 90%, non-condensation
- Operating Altitude: up to 5000meters
PoE Surge Protection
- Protected line: 1,2,3,4,5,6,7,8
- Common mode surge protection(10/700us): 6KV
- Differential mode surge protection (10/700us): 1.5KV
- Case: Metal
- Color: Black
- Mounting: Wall-mounted
- IP Rated: IP40
- Size: 115mm X 75mm X 32mm
- Weight: 400g
- FCC CFR47 Part 15, EN55024, EN55032
- IEC61000-4-2(ESD) ± 6kV(contact), ±8kV(air)
- IEC61000-4-3(RS) 10V/m(80MHz~2GHz)
- IEC61000-4-4(EFT) Power Port: ±2kV; Data Port:±1kV
- IEC61000-4-5(Surge) Power Port:±1kV/DM, ±2kV/CM
- IEC61000-4-6(CS) 10V(150kHz~80MHz)
- IEC60068-2-32(Free Fall)
- Power Indicator: Green
- PoE Load Indicator: Yellow
PT-PSE105G-D 44-57Vdc Input/30W Output/1000Mbps/(4,5+,7,8-) /Surge Protection/Active
PT-PSE105G-D x 1
Ground lug Wire x 1: 16AWG/0.5meters
Manual x 1
Order samples, we have in stock.
Bigger orders, 2-4 weeks after payment.
How to buy?
Click the BLUE BUTTON "Inquire now" (in the middle of page), input your order info and send to us.
Your sales consultant will contact you within 24 hr.
YES. Tell us your demand, get the products you want.
For distributors, we can put your labels on it too.