1. Boost PoE injector
PT-PSE105G-E connected with switch to exchange data, supply power through Cat5e cable to remote PD, effective distance is 100m.
2. Intelligence chip is inside, detective PD before supply power.
PT-PSE105G-E with intelligence chip inside, detective PD before supply power, if the PD is compliant with IEEE802.3af/IEEE802.3at standard, supply 55Vdc power, if not do not supply power, avoid of device destroy and increase safety level.
3. External solar power supply system connected
Product allows 12-24Vdc input and solar power panel is acceptable, output power is 30W, output current is 550mA, could powered for high power request PD, such as outdoor wireless base station, wireless AP, network cameras.
4. Better ambient temperature adaptation, convenience to fix.
PT-PSE105G-E is ambient temperature is good, -40℃～65℃；with rail slot, can be fixed at guide rail.
PT-PSE105G-E is a single-port, industrial-scale PoE injector. It provides 55Vdc, 0.55A power for remote PDs over 2-pairs output with 6KV (10/700us) surge protection. It supports both 10/100Base-T and Gigabit device. It works for 30W PoE PDs, such as wireless access points, network cameras, VoIp phones and other high power Ethernet terminals. It is also compatible and safe to use with any IEEE802.3at/af compliant terminals.
PT-PSE105G-E is designed for indoor use. It works with input voltage of 12-24Vdc and operates under -40℃ to 65℃. It has detection chip inside,which will detect and classify PD before powering it. It will not apply power until a standardcompliant PD is detected. The effective distance is 100m over Cat5e/Cat6 cables.
It has grooves, can easily jam into the guide rail.
- IEEE802.3 10Base-T Ethernet
- IEEE802.3u 100Base-Tx Fast Ethernet
- IEEE802.3ab 1000Base-T Gigabit Ethernet
- Support IEEE802.3af/at standard PoE device
- RoHS Compliance
- WEEE Compliance
Input & Output
- Input :12-24Vdc 4A
- Output: 55Vdc 550mA
- Power Pins: 4/5(+), 7/8(-)
- Data Speed: 10/100/1000Mbps
- Operating Temperature: -40℃ to 65℃
- Operating Humidity: 20% to 80%, non-condensation
- Storage Temperature: -40℃ to 85℃
- Storage Humidity: 10% to 90%, non-condensation
- Operating Altitude: up to 5000meters
PoE Surge Protection
- Protected line: 1,2,3,4,5,6,7,8
- Common mode surge protection(10/700us): 6KV
- Differential mode surge protection (10/700us): 1.5KV
- Case: Metal
- Color: Black
- Mounting: DIN-rail
- IP Rated: IP40
- Size: 115mm X 75mm X 32mm
- Weight: 600g
- FCC CFR47 Part 15, EN55024, EN55032
- IEC61000-4-2(ESD) ± 6kV(contact), ±8kV(air)
- IEC61000-4-3(RS) 10V/m(80MHz~2GHz)
- IEC61000-4-4(EFT) Power Port: ±2kV; Data Port:±1kV
- IEC61000-4-5(Surge) Power Port:±1kV/DM, ±2kV/CM
- IEC61000-4-6(CS) 10V(150kHz~80MHz)
- IEC60068-2-32(Free Fall)
- Power Indicator: Green
- PoE Load Indicator: Yellow
PT-PSE105G-E 55Vdc/0.55A/1000M/(4,5+,7,8-) /Surge Protection/Active
PT-PSE105G-E x 1
Manual x 1
Order samples, we have in stock.
Bigger orders, 2-4 weeks after payment.
How to buy?
Click the BLUE BUTTON "Inquire now" (in the middle of page), input your order info and send to us.
Your sales consultant will contact you with 24 hr.
YES. Tell us your demand, get the products you want.
For distributors, we can put your labels on it too.