1. Design for solar
PROCET PT-PSE105GW-E Industrial PoE injector, with input voltage 44-57Vdc, suitable for most industial situation.
2. 6KV surge protection on PoE port
PT-PSE105GW-E has a 6KV surge protection on PoE port to protect inner components and switch from surge damages.
3. Working temperature -45℃ to 65℃
PT-PSE105GW-E work temperaure is -40℃ to 65℃, it even meets requests of plateau projects and chilly condition projects.
PT-PSE105GW-E is a single-port, industrial-scale PoE injector. It provides 55Vdc, 1.1A power for remote PDs over full 4-pairs output with 6KV (10/700us) surge protection. It supports both 10/100Base-T and Gigabit device. It works for 60W PoE PDs, such as wireless access points, network cameras, VoIp phones and other high power Ethernet terminals. It is also compatible and safe to use with any IEEE802.3at/af, PoE++ compliant terminals.
PT-PSE105GW-E is designed for indoor use. It works with input voltage of 44-57Vdc and operates under -40℃ to 65℃ It has detection chip inside,which will detect and classify PD before powering it. It will not apply power until a standardcompliant PD is detected. The effective distance is 100m over Cat5e/Cat6 cables.
It has grooves, can easily jam into the guide rail.
- IEEE802.3 10Base-T Ethernet
- IEEE802.3u 100Base-Tx Fast Ethernet
- IEEE802.3ab 1000Base-T Gigabit Ethernet
- Full compliant with IEEE802.3af/at
- RoHS Compliance
- WEEE Compliance
Input & Output
- Input: 44-57Vdc 4A
- Output: 55Vdc 1100mA
- Power Pins: 4/5(+), 7/8(-) & 1/2(-),3/6(+)
- Data Speed: 10/100/1000Mbps
- Operating Temperature: -40℃ to 65℃
- Operating Humidity: 20% to 80%, non-condensation
- Storage Temperature: -40℃ to 85℃
- Storage Humidity: 10% to 90%, non-condensation
- Operating Altitude: up to 5000meters
PoE Surge Protection
- Protected line: 1,2,3,4,5,6,7,8
- Common mode surge protection(10/700us): 6KV
- Differential mode surge protection (10/700us): 1.5KV
- Case: Metal
- Color: Black
- Mounting: DIN-rail
- IP Rated: IP40
- Size: 115mm X 75mm X 32mm
- Weight: 600g
- FCC CFR47 Part 15, EN55024, EN55032
- IEC61000-4-2(ESD) ± 6kV(contact), ±8kV(air)
- IEC61000-4-3(RS) 10V/m(80MHz~2GHz)
- IEC61000-4-4(EFT) Power Port: ±2kV; Data Port:±1kV
- IEC61000-4-5(Surge) Power Port:±1kV/DM, ±2kV/CM
- IEC61000-4-6(CS) 10V(150kHz~80MHz)
- IEC60068-2-32(Free Fall)
- Power Indicator: Green
- PoE Load Indicator: Yellow
PT-PSE105GW-E 55Vdc/1.1A/1000Mbps/(4,5+,7,8-) & 1/2(-),3/6(+)/Surge Protection/Active
Order samples, we have in stock.
Bigger orders, 2-4 weeks after payment.
How to buy?
Click the BLUE BUTTON "Inquire now" (in the middle of page), input your order info and send to us.
Your sales consultant will contact you with 24 hr.
YES. Tell us your demand, get the products you want.
For distributors, we can put your labels on it too.