PT-PSE105GWS-E is a single-port, industrial-scale,boost PoE injector with fiber port. It provides 55Vdc, 1.1A power for remote PDs over full 4 pairs output with 4KV (10/700us) surge protection. It supports 10/100/1000Mbps of data speed. It works for 60W PoE PDs, such as wireless access points, network cameras, VoIp phones and other high power Ethernet terminals. It is also compatible and safe to use with any IEEE802.3af/at, PoE++ compliant terminals. It works as a switch, data is interoperable between PoE port and SFP port.
PT-PSE105GWS-E is designed for indoor use. It works with input voltage of 12-48Vdc and operates under -40℃ to 65℃ It has detection chip inside,which will detect and classify PD before powering it. It will not apply power until a standard-compliant PD is detected. The effective distance is 100 meters over Cat5e/Cat6 cables. This model equiped standard DIN rail mounting bracket, which can easily jam into the guide rail.
1. Fiber convert feature
PROCET PT-PSE105GWS-E Industrial PoE injector with input voltage 12-48Vdc, accepts fiber signals. It is designed for special scenarios, like highway side, exurb, etc.
2. 4KV surge protection on PoE port
PT-PSE105GWS-E has a 4KV surge protection on PoE port to protect inner components and switch from surge damages.
3. Working temperature -40℃ to 65℃
PT-PSE105GWS-E work temperaure is -40℃ to 65℃, it even meets requests of plateau projects and chilly condition projects.
- IEEE802.3 10Base-T Ethernet
- IEEE802.3u 100Base-Tx Fast Ethernet
- IEEE802.3ab 1000Base-T Gigabit Ethernet
- Full compliant with IEEE802.3af/at, PoE++
- RoHS Compliance
- WEEE Compliance
Input & Output
- Input :12-48Vdc 4.0A
- Output: 55Vdc 1100mA
- Power Pins: 4/5(+), 7/8(-) & 3/6(+),1/2(-)
- Data Speed: 10/100/1000Mbps
- Operating Temperature: -40℃ to 65℃
- Operating Humidity: 20% to 80%, non-condensation
- Storage Temperature: -40℃ to 85℃
- Storage Humidity: 10% to 90%, non-condensation
- Operating Altitude: up to 5000meters
PoE Surge Protection
- Protected line: 1,2,3,4,5,6,7,8
- Common mode surge protection(10/700us): 4KV
- Differential mode surge protection (10/700us): 1.5KV
- Case: Metal
- Color: Black
- Mounting: DIN-rail
- IP Rated: IP40
- Size: 144.5mm X 86mm X 35.4mm
- Weight: 485g
- FCC CFR47 Part 15, EN55024, EN55032
- IEC61000-4-2(ESD) ± 6kV(contact), ±8kV(air)
- IEC61000-4-3(RS) 10V/m(80MHz~2GHz)
- IEC61000-4-4(EFT) Power Port: ±2kV; Data Port:±1kV
- IEC61000-4-5(Surge) Power Port:±1kV/DM, ±2kV/CM
- IEC61000-4-6(CS) 10V(150kHz~80MHz)
- IEC60068-2-32(Free Fall)
- Power Indicator : Green
- PoE Load Indicator : Green
- SFP fiber indicator: Green
- PoE data indicator: Yellow
PT-PSE105GWS-E Boost/ 55Vdc/1.1A/1000Mbps/4,5(+), 7,8(-) & 3,6(+), 1,2(-) /Surge Protection/Active
Ground lug Wire: 16AWG
Order samples, we have in stock.
Bigger orders, 2-4 weeks after payment.
How to buy?
Click the BLUE BUTTON "Inquire now" (in the middle of page), input your order info and send to us.
Your sales consultant will contact you with 24 hr.
YES. Tell us your demand, get the products you want.
For distributors, we can put your labels on it too.