PT-PSE107GRO-S Wide-temperature 60W SFP PoE Injector PT-PSE107GRO-S Wide-temperature 60W SFP PoE Injector PT-PSE107GRO-S Wide-temperature 60W SFP PoE Injector PT-PSE107GRO-S Wide-temperature 60W SFP PoE Injector

PT-PSE107GRO-S Wide-temperature 60W SFP PoE Injector

Inquire Now Next Product

    1. SFP port 

    Factly, PT-PSE107GRO-S is a small switch. Data output through PoE port and SFP port simultaneously, that is to say, besides power device near, PT-PSE107GRO-S also could transmit data to remote equipment. LAN, Fiber and PoE are data intercommunicating.


    2. 60W output, active PoE Injector

    Output voltage is rated, 55Vdc. With detection chip inside, befor powering, there has a detect process.


    3. 4KV surge protection on PoE port

    To protect indoor devices and inner components from surge damage, we design 4KV(10/700μs) on PoE port.


    4. Working temperature -40℃ to 65℃

    PT-PSE107GRO-A design industrial level working temperature -40℃ to 65℃, to meet harsh conditions requiremetns.


    PT-PSE107GRO-S is a single port PoE Injector with SFP fiber connection port. It provides 55Vdc, 1.1A power for remote PDs over full-4pairs output with 4KV (10/700us) surge protection. It supports both 10/100Base-T and Gigabit device. It works for 60W PoE PDs, such as wireless APs, base stations, high power cameras, door locks, displays, POS, information kiosks and other high power Ethernet terminals. It is also compatible and safe to use with any IEEE802.3af/at, PoE++ compliant terminals. It works like a switch, data is interoperable among LAN port, PoE port and SFP port.


    PT-PSE107GRO-S is designed for indoor use but can work outdoor by covered with waterproof case. It works with 100-240Vac input and operates under -40℃ to 65℃ full loading. It has detection chip inside, which will detect and classify PD before powering it. It will not provide power until a standardcompliant PD is detected.The effective distance is 100 meters over Cat5e/Cat6 cables. It is specially suitable for working in complex power situations.


    Schematic Diagram


    Standard

    - IEEE802.3 10Base-T Ethernet

    - IEEE802.3u 100Base-Tx Fast Ethernet

    - IEEE802.3ab 1000Base-T Gigabit Ethernet

    - Full compliant with IEEE802.3af/at, PoE++

    - RoHS Compliance

    - WEEE Compliance


    Input & Output

    - Input :100-240Vac 1.5A 50/60Hz

    - Output: 55Vdc 1100mA

    - Power Pins: 4/5(+), 7/8(-) and 3/6(+),1/2(-)

    - Data Speed: 10/100/1000Mbps


    Working Environment

    - Operating Temperature: -40℃ to 65℃

    - Operating Humidity: 20% to 80%, non-condensation

    - Storage Temperature: -40℃ to 85℃

    - Storage Humidity: 10% to 90%, non-condensation

    - Operating Altitude: up to 5000meters


    AC Surge Protection

    - 1.0KV (5P/5N)

    - L-N 1.2/50 (8/20) Tr/Th us

    - 2.0KV (5P/5N)

    - L-PE 1.2/50 (8/20) Tr/Th us

    - N -PE


    PoE Surge Protection

    - Protected line: 1,2,3,4,5,6,7,8

    - Common mode surge protection(10/700us): 4KV

    - Differential mode surge protection (10/700us): 1.5KV


    Mechanical Characteristics

    - Case: Metal

    - Color: Black

    - Mounting: Wall-mounted

    - IP Rated: IP20

    - Size: 203mm X 130mm X 41mm

    - Weight: 910g


    Safety Approvals

    - CE, FCC


    EMI

    - FCC CFR47 Part 15, EN55024, EN55032


    EMS

    - IEC61000-4-2(ESD) ± 6kV(contact), ±8kV(air)

    - IEC61000-4-3(RS) 10V/m(80MHz~2GHz)

    - IEC61000-4-4(EFT) Power Port: ±2kV; Data Port:±1kV

    - IEC61000-4-5(Surge) Power Port:±1kV/DM, ±2kV/CM

    - IEC61000-4-6(CS) 10V(150kHz~80MHz)


    Immunity

    - IEC60068-2-6(Vibration)

    - IEC60068-2-27(Impact)

    - IEC60068-2-32(Free Fall)


    LED Indicator

    - Power indicator: Green

    - Load active Indicator: Green

    - SFP fiber indicator: Green

    - LAN data indicator: Yellow

    Order Info.

    PT-PSE107GRO-S              55Vdc/1.1A/1000Mbps/(4,5+,7,8-) and (3,6+,1,2-)/Surge Protection/Active


    Packing

    PT-PSE107GRO-S x 1

    Power Cord x 1 (Optional)

    Manual x 1




    More Infomations

     

    Lead Time?

    Order samples, we have in stock.

    Bigger orders, 2-4 weeks after payment.

     

    How to buy?

    Click the BLUE BUTTON "Inquire now" (in the middle of page), input your order info and send to us. 

    Your sales consultant will contact you with 24 hr.

     

    OEM/ODM Services?

    YES. Tell us your demand, get the products you want.

    For distributors, we can put your labels on it too.

products